Decking Oil: When and How to Reapply to Revive Your Aussie Deck
06 December 2024
Know when and how to reapply decking oil to revive your Aussie deck. Available at I Got Wood, keep your timber protected, looking vibrant, and weather-ready!
Is your deck starting to look weathered? Then you should reapply decking oil to keep Aussie decks vibrant and resilient. Decking oil is a protective treatment designed to nourish and preserve timber decks. It penetrates deep into the wood, enhancing its natural appearance while providing protection against weather damage, UV rays, and general wear and tear. Decking oil also helps prevent cracking, warping, and drying out by maintaining the wood’s moisture balance.
Decking Oil: General Purposes
Applying decking oil to your timber decks can form a protective barrier against water, reducing the likelihood of rot or swelling. Additionally, it can prevent the decks from sun damage since it contains UV blockers, helping them maintain their natural colour and prevent greying. The oil likewise enriches the timber’s natural grain and colour, giving it a rich, polished look.
Reapplying the Decking Oil
To keep your Aussie deck looking fresh and resilient, it’s essential to reapply decking oil regularly, typically every 6 to 12 months depending on exposure to the elements.
If the following things happen, then it’s time to reapply decking oil.
1. Visual Fading: If the wood starts to look dry, grey, or faded, it’s time for a fresh coat.
2. Water Absorption: If the deck soaks after splashing some water rather than beading up, it only means that the protective layer has worn off.
3. Weather Changes: Season changes regularly. So, you should apply oil at the start of spring and again in autumn for optimal protection against extreme summer sun and winter rain.
There are a number of steps you must do in reapplying the decking oil. These steps are as follows.
1. Prepare the Surface: You must first sweep the deck to remove dirt, leaves, and debris. You should also clean it with a specialised deck cleaner to remove grime, grease, and old oil residue, then allow the deck to dry fully.
2. Light Sanding: You should also sand any rough or uneven spots, especially if the deck is older or has peeling oil. This helps the oil penetrate more effectively and provides a smooth surface.
3. Apply Decking Oil Evenly: Using a decking applicator pad, brush, or roller, apply a thin, even layer of oil along the wood grain. Work in small sections first to avoid overlap marks, and ensure you cover edges and corners.
4. Allow to Dry and Reapply if Needed: You must let the oil soak in and dry as per the product instructions, usually 4 to 6 hours. For additional protection and richer colour, apply a second coat of your chosen decking oil.
5. Final Cure: Wait at least 24 hours before placing the furniture back on the deck to allow the oil to cure completely.
Decking Oil at I Got Wood
Decking oils are available in various finishes, from clear to tinted, allowing you to choose the right look for your deck while providing long-lasting protection.
At I Got Wood, we offer a wide variety of quality decking oils to help revive your Aussie deck. They include Osmo Decking Oil, AussieClear Decking Oil, and CUTEK Extreme CD50 Decking Oil. These products are all effective in protecting decks from harsh weather elements while highlighting their beautiful appearance. Visit our online store today!
Optimized by: Netwizard SEO
